When it comes to access gates, we have to mention tripod turnstile, also known as turnstile gate, which is one of the access gates and one of our most common gates. It is used for import and export attendance, access control, consumption management and special channel control of enterprises and institutions to meet the management of ticket inspection channels such as subways, scenic spots, stations, wharfs, exhibitions, swimming pools, etc. It is well received by various units for its convenient installation and high cost performance. 's favorite.
Precautions for daily maintenance of tripod turnstile
1. During card reading, users are strictly prohibited from squeezing, leaning, or pushing the brake lever before the traffic light turns green, so as not to affect the normal operation of the device.
2. When the equipment is not in use, it is strictly forbidden to sit or lean on the gate rod, so as to avoid unnecessary damage to the gate.
3. Do not use the equipment directly in the open air or in a humid or corrosive environment, so as not to affect the service life of the equipment due to rain, moisture or corrosion.
4. When passing, the user only needs to push the brake lever lightly, and do not force the brake lever to move during the passage.
5. When the tripod turnstile is powered off, people must not be under the brake rod, so as not to hurt people if the rod falls.
6. The shell of this equipment is made of 304# stainless steel. It is necessary to scrub the outer surface with a soft fabric frequently to keep it clean and bright. Do not scrub the outer surface with hard objects to avoid scratches and affect the appearance. At the same time, washing with water should be prohibited to avoid short circuit of the electric control system. damage equipment.
7. Regularly check the connection of various moving parts of the equipment. If loose nuts, screws and other fasteners are found, they should be tightened in time to avoid malfunction of the gate due to long-term operation.
8. Regularly check the condition of the system protection ground connection to ensure its reliable access.
9. Regularly check the connectors and wiring points of the connection lines to ensure reliable connections.
10. In the process of using the tripod turnstile machine, it is necessary to take care of the turnstile, prohibit violent collision, strictly prohibit leaning, and strictly prohibit knocking, take care of the turnstile, do daily maintenance work, and effectively reduce the failure and maintenance cost of the turnstile.
Contact Person: Mr. sam