Have you ever found that railway stations use swing gates, and subway stations use wing gates? Do you have any doubts about this? Today, Mendao Baifenbai will give you a little knowledge about gates and answer why train stations often use swing gates and subway stations use wing gates? Before answering this question, we must first understand that the gate is not only the swing gate and the wing gate, but also the three-roller gate, the turnstile, the translation gate and the one-way gate. Today we mainly talk about swing gates and wing gates. If you want to understand why railway stations use swing gates, and subway stations use wing gates, it is necessary to clarify the differences and similarities between these two gates. Similarities between swing gates and wing gates:
The same thing 1. It is used for management and control of entrance and exit people flow, attendance, ticket checking, visitors, etc. It is a very commonly used pedestrian gate equipment. The same thing 2. All kinds of access control systems can be installed, such as credit card, face and so on. What is the difference between swing gate and wing gate:
If you want to use a suitable turnstile in a suitable place, you have to look at the differences. The following doorway Baifenbai mainly introduces the difference between a hem gate and a wing gate. 1. The way of opening the door is different. The door swing of the swing gate swings back and forth to control the opening and closing of the door, and the door swing of the wing gate is retracted toward the chassis to control the opening and closing of the door. 2. The movement control is different. The control mode of the swing gate movement is divided into mechanical type and automatic type. The control mode of the wing gate movement is only fully automatic. 4. Different appearance The plasticity of the appearance of the swing gate is the strongest among all gate equipment. The swing gate is divided into vertical, bridge, cylindrical, vertical and cylindrical in shape. The material of the blocking body is rich in variety, and the shape of the box body is also diverse, which is easy to design a very beautiful shape, so the railway station also has this factor in the selection of swing gates. The shape of the wing gate is only bridge type, the appearance is relatively simple, and the plasticity is not strong.
5. Different channel widths The width of the swing gate is the largest among all pedestrian gates, generally between 550mm-1000mm, and some high-end products can reach 1500mm. The width of the wing gate is between the three-roller gate and the swing gate, generally between 550mm-990mm. Therefore, people who pass through the railway station usually carry luggage, so it is more suitable to use swing gates to manage the passage, because the passage is relatively wide, and the subway station uses wing gates because of the large flow of people and the number of people passing by, which can effectively save travel time. 6. Different anti-tailing capabilities Both the swing gate and the wing gate have added a pedestrian traffic detection module, which can effectively detect the passing target, and the anti-tailing ability is good, but when used in occasions with large traffic, the anti-tailing ability of the wing gate (pedestrian detection module) is stronger. The above is the reason why railway stations use swing gates and subway stations use wing gates.
Contact Person: Mr. sam