The gate (AFC) is a kind of channel blocking device. Its most basic core is mainly channel management hardware. It is mainly used in urban rail, office buildings, factories and other entrance and exit scenarios. It has a lot to do with the access control system in terms of functional purposes and application scenarios. Similarities, so many customers will be confused and questioned, the access control gate is the access control system? What is the difference between an access control gate and an access control system?
Today, Guodian Intelligence will give you a popular science, what is the difference between an access control gate and an access control system? The working principle of the access control gate, let everyone understand the gate together.
What is the difference between an access control gate and an access control system? The gate is a kind of mechanical hardware, mainly including three-roller gates, swing gates, wing gates, translation gates, full-height rotary gates and other channel equipment; access control, here refers to the access control system software, is a complete set of access control management system. From this point of view, the access control system actually includes hardware such as gates and access control machines. The installation of the access control gate requires the supporting application of the access gate and the access control controller in order to achieve the purpose of intelligent management of entrances and exits.
Simply put, the access control gate belongs to the access control.
The working principle of the access control gate The access control gate integrates mechanical, electronic, microprocessor control and various identification technologies organically, and realizes multi-functional entrance and exit management requirements by matching different access control systems, visitor systems, biometric systems, etc. The main working principle That is, the operation of the blocking body is controlled by manpower, and the stop of the movement is controlled by the mechanical limit. The semi-automatic type uses electromagnets to control the movement and stop of the movement, while the fully automatic type uses the motor to control the movement and stop of the movement. By controlling the movement and stop of the movement, the opening and closing of the blocking body are further controlled. When the person passes through the pedestrian gate, if the person does not leave, the buzzer will alarm through the infrared detector, and the door will remain closed. The gate will close immediately.
Contact Person: Mr. sam