As the user of the swing gate, he understands the mechanical system, electronic control system and working principle of the swing gate, which can be effectively solved whether it is daily use or failure.
The mechanical system of the swing gate:
The swing braking mechanical system is divided into two parts: chassis and motion. The chassis is the carrier, and the equipment on it is direction indicator, reading and writing equipment, infrared sensors, etc. The motion is composed of motor, frame, transmission shaft, gate, etc.
The working principle of the swing gate system:
1. Turn on the power of the swing gate, and enter the working state after 3 seconds.
2. When the swing gate card reader reads the useful card, the buzzer will sound and sound to prompt pedestrians to read the card successfully; at the same time, it will recognize and process the information read from the card, and pass the signal Notify the main control board of the request.
3. The main control board of the swing gate accepts the signals from the card reader and the infrared sensor. After sensing and processing, it notifies the direction indicator and the motor of useful control signals, so that the direction indicator sign turns into a green arrow swing gate sign. If the system is in normal state In the closed state, the motor works, the limit switch controls the turning point of the electric control, and the door is opened (when the motor is not in the open state, the motor does not move, allowing pedestrians to pass.
4. After the pedestrian passes through the swing gate according to the direction indicator, the infrared sensor senses the whole process of the pedestrian passing through the swing gate, and continuously informs the main control panel of the signal until the pedestrian completely passes through the swing gate.
5. If the pedestrian forgets to read the card or the card is invalid and enters the swing gate, the swing gate system will prevent the pedestrian from passing through.
Contact Person: Mr. sam