Turnstile (AFC) is a channel blocking device. Its most basic core is channel management hardware. It is mainly used in entrance and exit scenarios such as urban rail, office buildings, and factories. It has a lot to do with access control systems in terms of functional purposes and application scenarios. Similarities, so many customers will be confused and questioned, is the access control gate an access control system? What is the difference between an access control gate and an access control system? Today, Guodian Smart will popularize science for everyone. What is the difference between an access control gate and an access control system? The working principle of the access control gate, let everyone understand the gate together.
What is the difference between an access control gate and an access control system? Gate is a kind of mechanical hardware, mainly including various channel equipment such as three-roller gate, swing gate, wing gate, translational gate, full-height rotary gate, etc. Access control, here refers to access control system software, is a complete set of entrance and exit control management system. From this point of view, the access control system actually includes hardware such as gates and access control machines. The installation of access control gates requires the matching application of channel gates and access control controllers in order to achieve the purpose of intelligent management of entrances and exits. In simple terms, access control turnstiles belong to access control.
Working principle of access control gate The access control turnstile organically integrates machinery, electronics, microprocessor control and various identification technologies, and realizes multi-functional entrance and exit management requirements by matching different access control systems, visitor systems, and biometric systems. The main working principle It is to control the operation of the blocking body through manpower, and the stop of the movement is controlled by the mechanical limit. The semi-automatic type is to control the operation and stop of the movement through the electromagnet, and the automatic type is to control the operation and stop of the movement through the motor. By controlling the operation and stop of the movement, the opening and closing of the blocking body is further controlled. When a person passes through the pedestrian swing gate, if the person does not leave, the buzzer will give an alarm through the infrared detector, and the door will remain closed. If an unauthorized pedestrian enters the door body detection area in the reverse direction when the door is opened, the access control turnstile The gate will be closed immediately.
Contact Person: Mr. sam