Safety precautions
AN210 effectively isolates unauthorized persons, and the infrared detection system effectively prevents the occurrence of trailing, following, entering in the opposite direction, lurking and crossing.
(1) In addition to the normal traffic detection function, the anti-lurking, anti-crossing, and anti-forcible intrusion high-level sensors can also effectively prevent overturning. The use of low-position infrared detection gratings and acrylic baffles can effectively prevent lurking. The minimum locking torque of 120NM can effectively prevent personnel from forcibly intruding.
2), anti-following, anti-trailing The AN210 channel is equipped with an infrared sensor system, which can accurately locate the entire passage of the personnel after entering the channel, and sense the passing status. After the unauthorized personnel are found to follow the trail (distance ≥ 40cm), according to customer requirements, quickly Swing the door wings back to block unauthorized personnel from the passage, prevent them from entering, and activate the alarm system.
Safety protection function
Traffic status prompts, power failure processing, emergency evacuation, door wing injury protection, etc.
2) On each base column of the access door, an LED traffic status indicator is installed. Green → means that the passage can be passed through, and red X means that this passage is disabled.
2), power off processing 1) If a fire alarm signal is received, the door wing will be automatically unlocked and automatically opened after being powered by the battery inside the gate. Easy to evacuate. 2) In case of power failure, the door wing will be automatically unlocked and automatically opened after being powered by the battery inside the gate. (3), emergency evacuation In case of emergency, people need to be evacuated quickly, you can use the channel control software provided by Anneng Gate, and use the "normally open" button method to open all channels. There are many ways to control buttons, such as normally open and free out. The control panel provides back-up security in case of emergency. In addition, a wireless signal receiver can also be installed inside the device, and a portable remote control can be used for short-range wireless control. The remote control only supports the door opening and closing function and can be carried by security personnel for easy operation.
(4), anti-door wing clip people (infrared installation)
The AN210 channel is equipped with 6 pairs of red sensors, of which there are as many as 5 pairs of infrared sensors for the anti-pinch sensing area. Even if the sensor judges wrongly, when the door wing flaps to the user, it senses the response torque. Immediately will automatically stop to avoid pinching people.
(5), door closing delay
When the pedestrian does not pass immediately after swiping the card, the door wing is kept open, and unauthorized personnel may sneak in. In order to avoid such incidents, the AN210 speed channel has an opening delay function. The default delay is set to 8 seconds. That is, within 8 seconds of swiping the card to open the door, the sensor in the channel will automatically close if it does not sense that there is a person passing through, and the delay time can be modified as needed.
Contact Person: Mr. sam
Tel: 13480168583
Fax: 86-775-28935596