With the acceleration of the construction of economic circles across the country, the demand for face recognition access control channels in smart construction sites has also been applied.
What is the real-name system channel for smart construction sites? The real-name access control system is a channel management system in which the face recognition system controls the access gate to realize the release of personnel. It can record the entry and exit time and attendance days of laborers according to the actual team, type of work, name and other information. Finally, the statistical information is uploaded to the company's platform through the data platform to realize platform supervision. Classification of construction site access control real-name system channels According to the type of gates, site access control can be roughly divided into the following categories:
1. Tripod Turnstile + Face Recognition
Tripid Turnstile is generally made of 201 or 304 stainless steel. The channel part is three sticks rotated 120 degrees to meet the release requirements, and each three-roller gate can form a separate channel. The advantage of the three-roller gate is that the cost is lower, and the transportation and installation are more convenient.
2. Swing gate + face recognition
The swing gate is named for its channel release mode, and the release and closing functions are realized by the motor driving the swing arm to open and close 90° back and forth. The single channel of the swing gate is composed of two single movements, the dual channel is composed of two single movements and one double movement, and the three channels are composed of two single movements and two double movements. The advantage of the swing gate is that the width of the channel is wider and the passage is more convenient, but the cost rate is higher than that of the three-roller gate.
3. Flap Barrier + face recognition
Flap Barriers are generally composed of stainless steel chassis and fins, and are often used in subway stations, construction sites, office buildings and other scenarios. The channel composition of flap barrier is the same as that of swing gates.
4. Full height turnstile
The common materials of full-height turnstiles are divided into 201 stainless steel and 304 stainless steel, and there are single-channel turnstiles and dual-channel turnstiles for options. There are many scenarios where full-height turnstiles are used in smart construction site access control systems. They can be directly installed in container access control rooms to prevent personnel from breaking through the gate and jumping over the gate. When choosing a full-height turnstile, it is necessary to compare the material, material, thickness, movement, control panel and other specifications of the turnstile in multiple directions.
Contact Person: Mr. sam