company news about Classification of face recognition labor real-name system for smart access control on construction sites

What is the smart construction site real-name channel? The real-name channel access control system is a channel management system that controls the access control gates by the face recognition system to realize the release of personnel. It can record the time of entry and exit of laborers and the number of days of attendance according to the actual team, type of work, name and other information. Finally, the statistical information is uploaded to the Shanxi Housing Construction Platform through the data platform to realize platform supervision.

Classification of construction site access control real-name system channels According to the type of gate, the access control of the construction site can be roughly divided into the following types

1. Tripod turnstile gate + face recognition

The tripod turnstile gate is generally made of 201 or 304 stainless steel, and the channel part is three rods that rotate 120 degrees to meet the release requirements, and each three-roller gate can form a channel independently. The advantage of the three-roller gate is that the cost is low, and the transportation and installation are more convenient.

2. Swing gate + face recognition

The swing gate is named for its channel release mode, and the release and closing functions are realized through the motor-driven swing arm to swing back and forth at 90°. The single channel of the swing gate is composed of two single cores, the double channel is composed of two single cores and one dual core, and the three channel is composed of two single cores and two dual cores. The advantage of the swing gate is that the channel width is wider and the passage is more convenient, but the cost rate is higher than that of the three-roller gate.

3. SWing Barrier Gate + Face Recognition

The wing gate is generally composed of stainless steel chassis and fins, and is often used in subway stations, construction sites, office buildings and other scenarios. The channel composition of the wing gate is the same as that of the swing gate.

4. Full height turnstile

Common materials for full-height turnstiles are 201 stainless steel and 304 stainless steel, and there are single-channel turnstiles and double-channel turnstiles for option. Full-height turnstiles are widely used in smart construction site access control systems, and can be directly installed in container access control rooms to prevent people from breaking into the gates and overturning the gates. When choosing a full-height turnstile, it is necessary to compare the material, material, thickness, movement, control panel and other specifications of the turnstile in all directions.