What are the main gates in the access control system? What are the uses? At subway ticket gates, high-speed rail stations, office buildings, parks, and entrances and exits of scenic spots, you can often see various types of turnstiles, many of which require identity verification to pass. The main types of gates are divided into tripod turnstiles, swing gates, wing gates, turnstiles, and speed gates. What is the difference between them?
The three-roller turnstile is generally mainly composed of three rods, the standard length of each rod is 1250mm, and the gap between the three rods can only accommodate one person. It is suitable for one-way or two-way control of people flow, and the traffic speed is average. Three-roller gates are generally used in access control occasions with low resistance requirements and low resistance levels. It is widely used in factory attendance system, public institution consumption system, community access control management, scenic spot ticket inspection system, construction site attendance system management, etc. According to the actual needs of specific occasions, the three-roller gate can be equipped with different identification systems (ID card, IC card, barcode, fingerprint, face recognition, etc.). The three-roller gate adopts a vertical descending rod. When the gate descends, a barrier-free pedestrian passage can be formed, which is convenient for emergency evacuation and guarantees the safety of passage.
2. Swing Barrier Gate
For some turnstile manufacturers, the material of the swing gate and the width of the aisle can be customized, which is suitable for one-way or two-way management personnel to enter and exit, and is more commonly used in office buildings and commercial buildings. The wide aisle swing gate can allow pedestrians or drag luggage people, and people in wheelchairs. Considering that the swing gate can achieve wider passage characteristics than the wing gate, most of the swing gate passages can be mixed with pedestrians, bicycles, mopeds, disabled vehicles and other non-motorized vehicles.
3.Flap Barrier Gate
Generally, the width of the swing barrier gate passage is 650mm, which is suitable for one-way or two-way personnel passage management. Mainly used for pedestrian channel management; it is an ideal pedestrian high-frequency access channel management and grooming equipment, with the characteristics of fast passage, safety, convenience, etc.; it can cooperate with smart cards to realize offline ticket management system functions, in airports, subway stations, stations, docks , scenic spots, parks, units and agencies are widely used.
4.Speed Gate Turnstile
The speed gate turnstile is an important part of the access management control system. The automatic door switch is driven by the control motor. After obtaining the access permission, the door will automatically open. According to the way the gate moves, it is divided into swing gate and shear gate. The gate of the swing gate does not need to be retracted from the box, which is safer than the shear gate, because the appearance of the speed gate is exquisite and beautiful, and it is generally mainly used in scenes such as office buildings.
5.Full Height Turnstile
For scenarios with strict security requirements, more turnstiles are generally used to achieve unattended and anti-following functions, such as: gymnasiums, exhibition halls, stations, communities, etc.
The above are several common gates introduced for you, and they play different roles in different intelligent management scenarios. When choosing a gate, you can choose the corresponding gate equipment according to the site installation scene, functional requirements and budget.
Contact Person: Mr. sam