Payment & Shipping Terms:
|Series:||Sliding Turnstile||Product Name:||DC24V|
|Material:||304 Stainless Steel||Size:||1400*280*980mm|
50/60Hz Passage Sliding Security Waist Height Turnstiles Access Control
half heigh sliding gate
high security product
Brand Name: RS Security
Model Number: RS1007
Application: High security places, fitness club, prison, hotel lobby, school
Material: 304 stainless steel
Bi-directional access control
|56Product Parameter||Parameter Description|
|Contains||Mechanism,Housing,Driver board,power supply|
|Housing Material||Stainless steel or Cold-rolled steel plate|
|Drive Mode||Motor drive|
|Communicatio||RS485, RS232, TCP/IP, Dry contact wiegand signal|
|Communication Interface||12V level signal or Pulse Wide > 100ms|
|Remote control by compute|
|Status Indication||Allow passing through/ Forbidden|
|Protection||When external force more than setting value, the tripod will be moved|
|Follwing Speed||35 people/minute in Normal close mode|
|Service Life||Three millions continuous opening and closing of barrier panel|
|Access Modes||Rotating 10 degree manually, then arms turned automatically|
|Voltage||Input AC220V (adjustable)|
Features and Functions:
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc. 13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function (optional).
15. Acrylic or solid wood board can be chose.
High security places, factory, fitness club, prison, hotel lobby, school, port, exhibition hall.