Safe And Reliable Optical Turnstiles Gates Drop Arm Barrier

Safe And Reliable Optical Turnstiles Gates Drop Arm Barrier

Barrier-free Turnstile,Optical Turnstiles RS 1006-W also called( Drop Arm Barrier,Drop Arm Gate,Drop Arm Turnstiles,One Arm Turnstiles ) etc. Drop Arm Turnstile RS 1006-W full body is made or 2.0mm-3.0mm thinckness sus304 stainless steel. Optical Turnstiles RS 1006-W cosist of motor,sensors,mechanism,bar,electric circuit etc. One Arm Turnstile RS 1006-W is upgrading products of Swing Barrier Doors,with smaller casing and mechanism. Drop Arm Tourniquets RS 1006-W requires smaller space. Drop Arm Torniquete RS 1006-W with stadard fire interface,arm can drop down for evacuation even power is not cut off when fire alarm triggered. Drop Arm Turnike RS 1006-W memoty can be set,swipe cards several times for group pass.fast transit speed. Drop Arm Barrieres RS 1006-W has standard relay signal, which can be integrated with any kind of third-party access control system (e.g.: Face Recognition,Biometric Readers,Fingerprint,RFID,QR Code/Barcode Reader ) etc. Drop Arm Barriers RS 1006-W is widely used in Fitness,Bus Stations,Subway Stations,Airport,Bank,Checkpoint,Construction,Entrance,Factory ) etc.

 1) Alarm function: when arms are pushed by force illegally, alarm will be triggered automatically and arms will be set locked. Self-examine
2) Turnstile can set the working condition by press the button of main control board.
3) Anti-pinch function: turnstile have Mechanical / infrared induction Anti-pinch functions (when it is meet the hinder during the reset time, the electrical machine closed work automatically in specified time, the turnstile will default the delayed and reset again till reset succeed), small intensity (≤2Kg).
4) The turnstile will close the door when somebody enter the gate illegal, Tailgating or break into negative direction gate.
5)Before received the open signal, the turnstile will lock automatically.
6) The retractable can be adjustable
7) Automatic Reset Functions: after you swap the card, during the specific time (the system is 10s), if you didn’t pass the turnstile, the system will cancel your authority automatically to pass the gate, (reset time is 1~60s you can adjust it what time is suit for you). Totally meet the fire protection needs.
8)Infrared sensor reset, infrared induction anti-pinch function (3 or 5 infrared optional).
The turnstile can work with door access control system/ consumption system /biometric recognition system/ ESD system and so on.

 1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function.
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gates)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, barcodes, fingerprints, etc. (Access controller needed).
9. Direction can be set as uni-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Support infrared photocell for anti-pinch and reset function