|Place of Origin:||China(mainland)|
|Brand Name:||RS Security|
|Model Number:||RS 716-3|
|Minimum Order Quantity:||1pcs|
|Packaging Details:||wooden box|
|Input Voltage:||220V AC220±10%||Operating Environment:||1400x115x1050mm|
|Size:||50 Persons/min||Arm Material:||Acrylic|
|Material:||304 Stainless Steel||Close And Open Time:||0.6S|
⇒The speed gate barriers are designed to work in a normally closed mode and retract inside the pedestal
after a valid card has been presented to allow the authorized user to pass. The fast moving close behind
the authorized person to deter tailgaters.
⇒The flap gate is usually used in bank lobby, office building, fitness club, school, it prevents unauthorized
people to enter the restricted areas
|Stainless thickness||standard 1.5mm, Can thicken;|
|Turnstile components||cabinet, arm, movement, controller, encoder, electromagnetic brake, glass panel;|
|Swing arm length||300-600mm;|
|Transmission arm angle||180 degree;|
|Swing direction||One-way or two-way;|
|Power||Single movement 50W,double movement 100W|
|Operating Voltage||AC220 ±10% V/50 ±10% HZ;|
|Motor||DC motor 40W/24V;|
|Normal life||500 million times;|
|Gate opening time||0.2 seconds;|
|Input interface||dry contact signal or 12V level signal;|
|Communication interface||RS485 or TCP / IP;|
|Pass speed||40 / min (normally open), 25-30 / min (Normally Closed);|
1.Equipped with standard input/output signal interface, can be integrated with all types of access control
panel, offering complete entrance control solutions.
2. Bi-directional passing or single way passing. 3.Equipped with LED directional indication / status lights.
4.The equipment's running state can be programmed by the built-in small visual panel on the master
5.In the case of power failure, the rotating arms open automatically to ensure unblocked access.
6.Mechanical structure can prevent operators from being clamped or wounded. As a rotating arm is
blocked in the process of reset, the motor will stop working within the specified time. The arm will reset
again (until it is reset) after defaulted time delay and the strength is small (≤2Kg).
7.Rotating arm is locked automatically before receiving an opening signal.
8. Automatic reset: if a person fails to pass within the specified time after the turnstile is opened, the
system will cancel authorization of this access automatically;
9.Highly durable design ensures the life span more than 5 million cycles.